Source avec lien : Ergonomics, (En ligne). 10.1080/00140139.2022.2030806
Il est nécessaire d’établir des critères de conception pour le travail au-dessus de l’épaule afin de prévenir la fatigue de l’épaule et les lésions du supraspinatus. Un outil a été mis au point pour estimer les forces manuelles maximales acceptables pour le travail au-dessus de l’épaule en se basant sur le 25e % de force féminine avec des ajustements pour le conflit du tendon sus-épineux et la fatigue de l’épaule. Les équations de l’outil sont présentées avec des tableaux des forces manuelles maximales acceptables du bras à 77 endroits dans l’espace 3 D au-dessus de l’épaule qui convient à une portée féminine de 50 %.
There is a need for design criteria for above-shoulder work to prevent shoulder fatigue and supraspinatus injuries. A tool is developed to estimate maximum acceptable manual arm forces for above-shoulder work based on 25th % female strength with adjustments for supraspinatus tendon impingement and shoulder fatigue. The tool equations are presented along with tables of maximum acceptable manual arm forces in 77 locations in the 3 D space above the shoulder that accommodates a 50th % female reach. The largest acceptable anterior force, 140.3 N, occurs at shoulder height, 0.5 m anterior to the shoulder. The largest acceptable superior force, 84.4 N, occurs at shoulder height, 0.1 m anterior and 0.2 m medial to the shoulder. The new tool provides design criteria for arm exertions at a higher level of detail than prior ergonomic tools, making it useful for engineers. Based on sensitivity analyses, the tool is robust to parameter assumptions. Practitioner summary: Above-shoulder work is associated with increased risk for shoulder fatigue and injuries. A new tool is developed that estimates maximum acceptable manual arm forces for work at or above shoulder height. The tool can be used to design acceptable above-shoulder work so that it can be accomplished by most workers. Abbreviations: AFF: arm force field; AP: anterior/posterior; DC: duty cycle; GH: glenohumeral angle; HT: humerothoracic angle; LM: lateral/medial; MAE: maximum acceptable effort; MAF: maximum acceptable force; MAS: manual arm strength; MVC: maximum voluntary contraction; N: newton; OCRA: occupational repetitive action; R: reach distance; RMS: root means square; RULA: rapid upper limb assessment; SF: scale factor; SI: superior/inferior; ST: scapulothoracic angle; T: thoracicKEY POINTSA new design tool is introduced that estimates maximum acceptable hand forces for specific locations above the shoulder.This above-shoulder tool is based on a 50th percentile female anthropometry and 25th percentile female manual arm strength.These base strengths are multiplied by scaling factors that adjust for subacromial impingement and fatigue.The tool was shown to be robust based on sensitivity analysis.